Foaming Adhesive Time-Series Photographs
Click on an image to enlarge it and then mouse over it to see the caption.
These pictures were taken on a roof during the installation of polyisocyanurate board insulation. We had the applicator squirt some of the two-component foamable polyurethane adhesive onto a piece of gypsum board and took pictures every five seconds as it foamed up. The first picture was taken five seconds after it was squirted onto the gypsum board, and the last picture, where the adhesive has almost completely finished foaming, was taken a minute later.
Go to Roof Online’s Roofing and Insulation Adhesives page.